Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 4 : Designing a Label
Launch BarTender
On the main 123 Print window tool bar, click the BarTender
icon, or on the menu bar:
1
Click Tools
2
Click BarTender
3
Open an existing label or create a new label in BarTender
4
Make sure the target Datamax printer model is defined in
Bartender’s printer settings.
Design your label as you normally would.
Save your BarTender label. On BarTender’s menu bar:
5
Click File
6
Click Save As…
7
Save the label into whichever folder you setup as the default BTW
folder when you were setting up 123 Print (see
Section 2.3.4 -
Others
). If you used the default path, save the label to BarTender’s
default location at C:\.<…>\BarTender\Formats
8
Click Save
Note: BarTender saves the label with a *.btw extension.
October 2007
Page
121