Datamax-ONeil RL3, User Manual

Page: 55 / 71

www.datamax-oneil.com C-6
C.4.4 WPA2-Enterprise
1) Click on the “W-Fi” printer
component.
2) Click the “Click the WPA/WPA2”
radio button.
3) Change (or confirm) the
following parameter settings:
Network Authentication Type:
WPA-Enterprise
Phase 2 Method: EAP-MSCHAPv2
EAP Type: Select EAP-PEAP
NOTE: EAP Type can be variable.
Other values supported: EAP-LEAP,
EAP-TTLS, EAP-PEAP and EAP-
FAST.
4) Type the username and
password under the “WPA/WPA2
Enterprise” section.
5) After updating the “New Value”
column, click the “Send” button
to send these changes to the
printer.