background image

MF8i 270 PRINTER USER'S GUIDE

15

Warranty

The Company warrants that Datamax-O’Neil products are free 

from defects in manufacturing materials and workmanship for one 

(1) year from date of original purchase to Buyer/Distributor 

(OEMs 90 days from the date of purchase). Batteries, cables, 

power supplies, and other accessories will be warranted for ninety 

(90) days. Datamax-O’Neil makes no other warranties, expressed 

or implied, including implied warranties of merchantability and 

fitness of purpose.

If you try to repair, disassemble, or change the product in any 

way, or use parts not provided by Datamax-O’Neil without prior, 

written authorization, all warranties are void.

For complete warranty and repair information, see the Warranty 

Card included in your original packaging.

Warranty Disclaimer

Customers are not required to purchase Datamax-O’Neil supplies. 

However, for a warranty claim, if Datamax-O’Neil determines that 

damage to the printhead or printer mechanism was directly 

caused by the use of non-certified or non-approved supplies, 

Datamax-O’Neil reserves the right to hold the user responsible for 

all labor and material charges required for the repair.

Copyright

This manual and any examples contained herein are provided “as 

is” and are subject to change without notice. Datamax-O’Neil 

makes no warranty of any kind with regard to this manual, 

including, but not limited to, the implied warranties of 

merchantability and fitness for a particular purpose. Datamax-

O’Neil shall not be liable for any errors or for incidental or 

consequential damages in connection with the furnishing, 

performance, or use of this manual or the examples

herein. This guide is copyrighted. All rights are reserved. This 

guide may not, in whole or in part, be reproduced, translated, 

stored in a retrieval system or transmitted in any form or by any 

means, electronic, mechanical, photographic, or otherwise, 

without the prior written consent of Datamax-O’Neil. 

Summary of Contents for microFlash 8i 270





















Reviews: