manualshive.com logo in svg

Dataman 48UXP, User Manual, Page: 69 / 72

Share
Download
Dataman 48UXP User Manual Download Page 69

 

 

 

Dataman-48UXP not found!

 

The Dataman-48UXP software does not detect the Dataman-48UXP 

on of the parallel ports, or the Dataman-48UXP may be failure and 

need to repair.   

Make sure the power on the Dataman-48UXP is on. Also check the 

parallel connection between the PC and the Dataman-48UXP. If the 

Dataman-48UXP shares the parallel port with another device, 

remove the other device or move the Dataman-48UXP to its own 

port. 

 

Dataman-48UXP power off or disconnected from PC!

 

The

 

Dataman-48UXP

 

software

 

does

 

not

 

detect

 

the

 

Dataman-48UXP 

on one of the parallel ports.   

Make sure the power on the Dataman-48UXP is on. Also check the 

parallel connection between the PC and the Dataman-48UXP. If the 

Dataman-48UXP shares the parallel port with another device, 

remove the other device or move the Dataman-48UXP to its own 

port. 

 

MOS Technology hex file can be 64KB maximum! 

This error is displayed when you want to save the buffer to a disk 

file, and the buffer is bigger than 64KB. 

The buffer can still be saved to disk, but only the first 64 KB will be 

saved. The rest will be lost. Choose another file format if you need 

to save the whole buffer. 

 

Manufacturer’s Code unmatched! 

This error message is returned when the Dataman-48UXP does a 

device ID check.   

The device code found on the device is not as expected. You might 

Summary of Contents for 48UXP









































































Reviews:

No comments