Dataman 48UXP User Manual Download Page 15 | Manualshive

Page: 15 / 72

Dataman 48UXP User Manual Download Page 15

Minimum PC System Requirements

Win 95/98/ME, Win 2000, Windows XP, Win NT 4.0 or latest

(NT OS system, need NT System ADM).

CUP: PII 750 and above.

RAM: 64MB minimum, 128 MB recommended.

HD: 16 MB of free hard disk space.

Interface:

1.

D-25 connector with parallel port ECP or EPP mode, EPP

mode recommended.

2.

USB device connector supports USB1.0/1.1/2.0.

CD ROM Driver.

Installing the Dataman-48UXP Hardware

1.

Connect the power cord to the Dataman-48UXP power

outlet.

2.

Connect the Dataman-48UXP to a parallel port or USB

port using the cable supplied.

3.

Turn the Dataman-48UXP power on.

4.

The Dataman-48UXP will perform self-test first, the green

LED lamp will on (good) if the system pass self test.

Installing the Dataman-48UXP Software

1.

Insert the CD ROM into CD driver of your PC, in my

computer ICON, double click the E driver (CD ROM);

this activates the E: Drive.

2.

Double click the set up ‘setup.exe’ ICON will starting the

«
...
13
14
15
16
17
...
»

Summary of Contents for 48UXP









































































Reviews:

No comments