SG4-H
13/45
1.5 SAFETY INFORMATION
The stopping system of the machine must be electrically controlled.
This control system must be able to stop the dangerous movement of the machine within the total machine
stopping time T as per paragraph
Minimum installation distance page 10
phases.
Mounting and connection of the safety light curtain must be carried out by qualified personnel only, according
to the indications included in the special sections (refer to sections
INSTALLATION page 14
MECHANICAL
MOUNTING page 23
ELECTRICAL CONNECTIONS page 24
ALIGNMENT PROCEDURE page 27
) and in
the applicable standards.
The safety light curtain must be securely placed in a particular position so that access to the dangerous zone is
not possible without the interruption of the beams (refer section
INSTALLATION page 14
The personnel operating in the dangerous area must be well trained and must have adequate knowledge of all
the operating procedures of the safety light curtain.
For a correct and safe use of the safety light curtains, the following points must be
observed:
Please carefully read the instructions for the correct functioning before powering the
light curtain on.
