2
PIN-OUT AND CONFIGURATION PIN CONNECTION
Receiver (RX)
Emitter (TX)
For the receiver an M8 4-pin male connector is used for power supply, while two M12 D-coded female Ethernet
connectors provide dual port Ethernet Powerlink CN Node connection.
CN1
SIGNAL
POWER CONNECTOR
1
24VDC (BROWN)
2
NOT USED (WHITE)
3
0 VDC (BLUE)
4
NOT USED (BLACK)
CN2
SIGNAL
ETHERNET POWERLINK PORT1
1
TxD+, transmit data +
2
RxD+, receive data +
3
TxD–, transmit data –
4
RxD–, receive data –
CN3
SIGNAL
ETHERNET POWERLINK PORT2
1
TxD+, transmit data +
2
RxD+, receive data +
3
TxD–, transmit data –
4
RxD–, receive data –
For the emitter an M8 4-pin male connector is used for power supply.
CN1
SIGNAL
POWER CONNECTOR
1
24VDC (BROWN)
2
NOT USED (WHITE)
3
0 VDC (BLUE)
4
NOT USED (BLACK)