Datalogic SG-LP SERIES Manual Download Page 3

 

 

MOUNTING 

TOP MOUNTING 

Insert the “b” ensemble inside the lateral groove keeping the couple of cams in vertical position (Fig. 2) until 
you’ve reached the right position (Fig. 4). 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

SIDE MOUNTING 

Insert the “b” ensemble abutting on the curtain side 
corresponding to the lateral groove. Keep the 
couple of cams in horizontal position (Fig. 3) and 
after they entered the groove rotate them of 90° 
(Fig. 4).  

 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 

 

Fig. 3 

Fig. 4

 

Fig. 2

 

a

b

c

Summary of Contents for SG-LP SERIES

Page 1: ...es Thanks to a specially designed CAM fixing equipment the laser pointer can be inserted into one of the two lateral grooves either from the top or from the side depending on which kind of fixing brackets have been used to mount the safety light curtain standard L or TOP BOTTOM Rotating ones One top and one lateral fixing brackets together with two tightening knobs allow to adjust SG LP laser poin...

Page 2: ...ate collection at an appropriate collection point Do not dispose of as household waste For more information contact the local authorities in charge of waste management Fig 1 INSTRUCTIONS INSTALLATION Install the emitting and receiving units of the SE SG series safety device in the defined positions refer to MECHANICAL MOUNTING chapter of the safety light curtain instructions manual The use of floo...

Page 3: ...ical position Fig 2 until you ve reached the right position Fig 4 SIDE MOUNTING Insert the b ensemble abutting on the curtain side corresponding to the lateral groove Keep the couple of cams in horizontal position Fig 3 and after they entered the groove rotate them of 90 Fig 4 3 Fig 3 Fig 4 Fig 2 a b c d ...

Page 4: ... height of the pointer NOTE The holes of the fixing bracket or the orientable supports or the rotating brackets available as accessories can be used to orientate the unit allowing angle adjustment along the vertical unit axis If necessary the inclination of the floor stand can be changed by simply mounting washers under the base 2 Repeat this procedure inserting the pointer in the lower part of th...

Reviews: