Datalogic Rhino II/ SH Blackline, User Manual

Page: 29 / 52

RHINO II/SH BLACKLINE CONFIGURATION
USER’S MANUAL
25
VIRTUAL KEYCODES
Special Function Codes
The following Function codes can be used to define Keys for special functions.
General Keyboard Codes
VKX_KB_MOVE -
BUT
Moving function for the Keyboard.
VKX_KB_ZOOM Zoom function for the keyboard. By pressing this key, the next
Zoom level will be activated. (See ZoomFactor on page 25)
VKX_K -
B_SWITCHTO=<kb
dnum>
Switches the keyboard to <kbdnum>.
VKX_KB_HIDE Deletes the actual keyboard from the screen.
VKX_KB_K -
BOPEN=<kbdnum>
Open the dedicated keyboard. The actual keyboard remains
unchanged displayed (unless it isn’t defined with the Mode
CloseOnClick).
VKX_KB_SCRRO -
TATE
Rotates the screen orientation by 90°. The orientation actually
will not be stored. After restart the unit will display again the
default orientation.
VKX_KB_UPDO Change the Keyboard-Position from the upper edge downward
and vice versa. The vertical X-Position will not change.
VKX_KB_KEYLIGHT After pressing on this Button the lighting mode of the HW-Keys
will be switched between the 4 possibilities.
VKX_KB_VOL -
UMEDLG
Open the dialog to set the volume.
VKX_KB_HWKEY -
LOCK
Blocks the HW-Toolbar completely (default). This changing will
not stored.
VKX_KB_HWKEY -
SCAN
Turns the whole HW-Toolbar for scanning on. This changing will
not stored.
VKX_K -
B_HWKEY_NORM
Release the HW-Toolbar for normal use.
VK_SEPARATOR VK_F2
VK_BACK VK_F3
VK_TAB VK_F4
VK_CLEAR VK_F5
VK_RETURN VK_F6
VK_SHIFT VK_F7
VK_CONTROL VK_F8