Setting Up the Reader
2
QuickScan™ QD2430
Setting Up the Reader
Follow the steps below to connect and get your reader up and
communicating with its host.
1.
Connect the Cable to the reader and the Host.
2.
Configure the Interface (see page 5).
3.
Configure the Reader starting on page 13 (optional,
depends on settings needed).
Connect/Disconnect Cable to Reader
Figure 1. Connecting to the Reader
Host Connection —
The QuickScan plugs directly into the host
device as shown in
Figure 2
. The power can also be supplied
through an external power supply via the Interface Cable sup-
plied with a power jack.
Figure 2. Connecting to the Host
Side View
Rear
View
US
B
Side
View
Summary of Contents for QuickScan QD2430
Page 4: ...ii QuickScan QD2430...
Page 38: ...Support Through the Website 30 QuickScan QD2430...
Page 39: ......
