QUICKSCAN
TM
MOBILE
5
SYSTEM CONNECTIONS
Connections should always be made with power off!
CAUTION
You can connect the QuickScan
TM
Mobile cradle to the Host through the
dedicated connector, using the cable corresponding to the desired interface
type.
1.
Connect the appropriate interface cable to the cradle by simply plugging it
into the Host connector on the base of the cradle.
QuickScan Mobile Cradle - Bottom View
To disconnect the cable, insert a paper clip or other similar object into the hole
corresponding to the connector on the base of the cradle. Push down on the clip
while unplugging the cable. Refer to the following figure:
Disconnecting the Cable
RS-232
USB
Host Interface Cable
