Datalogic QuickScan L, Manual

Page: 31 / 100

Setup Field(s)
Advanced Data Formatting Guide
27
Setup Field(s)
Table 1. Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor to a Character
Scan the barcode:
Move Cursor To Character on
page 28
, then any printable ASCII character from the
Alphanumeric Keyboard, starting on page 6-81
.
When this is used, the cursor moves to the position after
the matching character. If the character is not there, the
rule fails and ADF tries the next rule.
28
Move Cursor to Start of Data
Scan this barcode to move the cursor to the beginning of
the data.
28
Move Cursor Past a Character
This parameter moves the cursor past all sequential
occurrences of a selected character. For example, if the
selected character is ‘A,’ then the cursor moves past ‘A,’
‘AA,’ ‘AAA,’ etc. Scan the barcode:
Move Cursor Past
Character on page 28
, then select a character from the
Alphanumeric Keyboard
. If the character is not
there, the cursor does not move (i.e., has no effect).
28
Skip Ahead “N” Characters Scan one of these barcodes to select the desired number
of positions to move the cursor ahead.
29
Skip Back “N” Characters Scan one of these barcodes to select the desired number
of positions to move the cursor back.
30
Send Preset Value Send prefix and/or suffix value by scanning the appropri-
ate barcodes on
page 31
. The prefix or suffix values must
be preset using the “ Set Prefix ” and/or “ Set Suffix ” bar-
codes from the Product Reference Guide (PRG).
31