Datalogic QBT2101-BK-BTK+, Product Reference Manual

Page: 259 / 360

Plessey
Product Reference Guide 249
Plessey Set Length 1
This feature specifies one of the barcode lengths for Plessey Length Control on
page 248 . Length 1 is the minimum label length if in Variable Length on page
248 Mode, or the first fixed length if in Fixed Length on page 248 Mode. Length
includes the barcode’s data characters only. The length can be set from 01 to
50 characters.
Table 3 provides some examples for setting Length 1. See page 306 for
detailed instructions on setting this feature.
Table 3. Plessey Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
01 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT Plessey LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Plessey Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the beginning.
CANCEL
DEFAULT
01 = Length 1 is 1 Character