background image

Datalogic S.r.l.

Via S. Vitalino, 13 

40012 Calderara di Reno (BO)

Italy

Tel. +39 051 3147011

Fax +39 051 3147205

©2020-2023 Datalogic S.p.A. and /or its affiliates

All  rights  reserved.  Without  limiting  the  rights  under  copyright,  no  part  of  this  documentation  may  be

reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or

for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates.
Owners  of  Datalogic  products  are  hereby  granted  a  non-exclusive,  revocable  license  to  reproduce  and

transmit  this  documentation  for  the  purchaser's  own  internal  business  purposes.  Purchaser  shall  not

remove or alter any proprietary notices, including copyright notices, contained in this documentation and

shall ensure that all notices appear on any reproductions of the documentation.
Electronic  versions  of  this  document  may  be  downloaded  from  the  Datalogic  website  (www.data

-

logic.com). If you visit our website and would like to make comments or suggestions about this or other

Datalogic publications, please let us know via the "Contact" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is complete and accu

-

rate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein,

nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the

right to change any specification at any time without prior notice.

Trademarks

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including

the U.S.A. and the E.U.
All other trademarks and brands are property of their respective owners.

Summary of Contents for PWR-240B



























Reviews: