User’s Guide
23
Laser Cautions
The PowerScan RF bar code scanner is certified in the U.S. to conform
to the requirements of
DHHS/CDRH 21CFR Subchapter J for Class II laser
products (SR and LR) and Class IIIa (XLR)
. Class II and IIIa products are
not considered to be hazardous. The scanner contains a Visible Laser
Diode (VLD) at a wavelength of 650-670 nanometers and is designed so
that there can be no human access to harmful levels of laser light dur-
ing normal operation, user maintenance, or during prescribed service
operations.
NOTE
Figure 11 above shows label placement ONLY. For
actual regulatory, patent and other applicable infor-
mation, view the labels on the product itself, or call
your nearest sales or service representative.
CAUTION
In the unlikely event that a bright laser spot is expe-
rienced rather than a scan line, do not stare into the
beam or attempt to repair the unit. Discontinue
operation and return the unit to your dealer. Note
that when using Marker Beam Mode, a single aim-
ing dot is projected momentarily preceding a scan
line and is not considered a malfunction.
CAUTION
Do not open or otherwise service any components
in the optics cavity. Opening or servicing any part
of the optics cavity by unauthorized personnel may
violate laser safety regulations. The optics system
is a factory only repair item.
NOTE
The PowerScan
®
RF scanner is required to be used
in conjunction with the Datalogic Base Station,
Model: PowerScan RF Base Station.
Summary of Contents for PowerScan RF SR
Page 6: ...User s Guide iv NOTES...
Page 8: ...ii PowerScan RF Scanner...
Page 10: ...2 PowerScan RF Scanner...
Page 122: ...114 PowerScan RF Lettore portatile di codici a barre NOTE...
