Linking the Reader
QUICK REFERENCE GUIDE
7
1. If using a Bluetooth adapter on the host device, install
any driver provided with the adapter.
2. Scan the
Link to Host in SPP mode
label below to
make the scanner visible to the host device.
3. Use the Bluetooth manager of the host device to “Dis
-
cover new devices” and select "PBT9600...". If you
receive an error message, it may be necessary to
change the security settings on either the host device
or the scanner.
4. Use an RS-232 terminal program to see incoming data
on the port designated by the Bluetooth manager of
the host device.
Link to Host in SPP Mode
Link Scanner as HID device to a Bluetooth host
Use this procedure to let the PowerScan PBT9600 send
data to a Bluetooth host using the Bluetooth HID profile.
1. If using a Bluetooth adapter on the host device, install
any driver provided with the adapter.
2. Scan the
Link to Host in HID mode
label below to
make the scanner visible to the host device.
3. Use the Bluetooth manager of the host device to "Dis
-
cover new devices" and select "PBT9600 …". If you
receive an error message, it may be necessary to
change the security settings on either the host device
or the scanner.
4. On the host device, open the program that is meant
to receive the incoming data.
Link to Host in HID mode
