Datalogic PowerScan PD7100 Corded, Product Reference Manual

Page: 112 / 392

Data Editing
102 PowerScan TM PD7100 Corded
Please Keep In Mind...
• Modifying a message string is not a mandatory requirement. Data editing is
sophisticated feature allowing highly customizable output for advanced users. Fac-
tory default settings for data editing is typically set to NONE.
• A prefix or suffix may be applied (reference the
Symbologies
chapter for these set-
tings) across all symbologies (set via the Global features in this chapter).
• You can add any character from the
ASCII Chart
(from 00-FF) on the inside back
cover of this manual as a prefix, suffix or Label ID.
• Enter prefixes and suffixes in the order in which you want them to appear on the
output.
Global Prefix/Suffix
Up to 20 ASCII characters may be added as a prefix (in a position before the barcode
data) and/or as a suffix (in a position following the barcode data) as indicated in
Figure 4
.
Figure 4. Prefix and Suffix Positions
Example: Setting a Prefix
In this example, we’ll set a prefix for all symbologies.
1. Determine which ASCII character(s) are to be added to scanned barcode data. In
this example, we’ll add a dollar sign (‘$’) as a prefix.
2. Scan the ENTER/EXIT barcode.
3. Scan the SET GLOBAL PREFIX barcode.
4. Reference the ASCII Chart on the inside back cover of this manual, to find the hex
value assigned to the desired character. The corresponding hex number for the ‘$’
character is 24. To enter this selection code, scan the ‘2’ and ‘4’ barcodes from
Appendix E, Keypad
.
Prefix Suffix AIM ID Label ID Label ID Bar Code Data
00 - 20 Characters (ASCII)
AND
OR
OR...
NOTE
If you make a mistake before the last character, scan the CANCEL barcode to
abort and not save the entry string. You can then start again at the beginning.