Datalogic PowerScan PBT9501-AR, Quick Reference Manual

Page: 10 / 44

Using the PowerScan™ PBT9501-AR
2 PowerScan™ PBT9501-AR
Using the PowerScan™ PBT9501-AR
The PowerScan™ PBT9501-AR reader normally functions
by capturing and decoding 1D and 2D codes. The intelli-
gent aiming system indicates the field of view which
should be positioned over the code. The reader is
equipped with an aiming system which helps to aim the
target.
Figure 1- Aiming System
If enabled, a partial trigger press produces a red spot,
which should be aimed over the code center to get the
best reading performance. By completely pressing the
trigger the illumination area appears and the code scan-
ning starts.
Aiming Pointer
Scan the following symbols to enable or disable the aim-
ing pointer.
The field of view indicated by the aiming system and the
illumination area will be smaller when the reader is closer
to the code and larger when it is farther from the code.
Symbologies with smaller bars or elements (mil size)
should be read closer to the unit. Symbologies with larger
bars or elements (mil size) should be read farther from the
unit.
Aiming Pointer = disable
Aiming Pointer = enable