Datalogic Pegaso, Installation Manual, Page: 17 / 36

Installation Guide
11
Chapter 3
Mounting Options
Ram Ball Mounting Assembly
This chapter outlines the steps needed to assemble and mount the Powered
Mobile Dock using the Ram Ball mount accessory. The Ram Ball and mount-
ing assembly, shown in Figure 6, combine to form an extremely flexible
mounting assembly. This assembly allows wide range of rotation for the
Mobile Dock. It can be mounted on any flat horizontal or vertical surface.
Figure 6. The Ram Ball Mount
Ram Ball
Mounting
Assembly
CAUTION
Install only on properly grounded mobile platforms. If this Dock is used on an
electric vehicle, ensure that no part of the PMD and PDA can come into contact
with the vehicle chassis. Electrical discharges can develop on these vehicles,
which can damage the PMD and/or PDA. Refer to “Electrical Considerations”
starting on page
5
for important information.