Set Date and Time
Quick Reference Guide
9
Resetting Product Defaults
If you aren’t sure what programming options are in your
reader, or you’ve changed some options and want your
custom factory settings restored, scan the bar code below
to reset the reader to initial configuration. See the PRG for
other options, and a listing of standard factory settings.
Reset Default Settings
Set Date and Time
1. Scan the Enter/Exit Programming barcode below to
set date and time.
ENTER/EXIT PROGRAMMING MODE
2. Scan the Set Date b six digits for Year, Month
and Day (YYMMDD) from the
Hex-Numeric Keypad on
page 32
.
Set Date
3. Scan Set Time + six digits for Hours, Minutes and Seconds
(HHMMSS) from the
Hex-Numeric Keypad on page 32
.
Set Time
4.
Scan the Enter/Exit Programming barcode to com-
plete.
NOTE
Factory defaults are based on the interface
type. Be sure your reader is configured for the
correct interface before scanning this label.
