CHARGE THE MEMOR K
Insert the device into the dock with the screen facing
front and the head facing up.
The dock is able to provide power to the Memor K
when the device is correctly inserted.
WARNING: Do not attempt to charge
any other device different from the
Memor K devices.
AVERTISSEMENT: n’essayez pas de
charger un autre appareil différent des
appareils Memor K.
CHARGE THE SPARE BATTERY
Insert the spare battery into the slot, contacts side
first, and then gently press it into place. The spare
battery status LED illuminates red.
When charging is complete, the spare battery status
LED illuminates green.
LED INDICATORS
LED Behavior
Operation Status
Power ON
Solid green
Dock is powered
Spare Battery Status
Off
No battery
Solid red
Spare battery is charging
Solid green
Spare battery charge completed
TECHNICAL SPECIFICATIONS
Eletrical Features
Indicators
Consumption
Power on LED (green)
Spare Battery Status LED (red,
green)
12V 2A
Environmental Features
Working Temperature
0°C to 45°C
Storage Temperature
-30°C to 70°C
Humidity
5-95% non condensing
Mechanical Features
Dimensions
109 x 130.2 x 61.8 mm / 4.3 x 5.1
x 2.4 in
Weight
225 g / 7.94 oz
EUROPEAN DECLARATION OF
CONFORMITY
Hereby, Datalogic S.r.l. declares that this radio equip-
ment is in compliance with Directive 2014/53/
EU. The full text of the EU declaration of conformity is
available at:
www.datalogic.com
. Select
the Support & Service > Downloads > Product Certifi-
cations link where you can search for your
specific product certification.
UKCA DECLARATION OF
CONFORMITY
Hereby, Datalogic S.r.l. declares that the full text of
the UKCA Declaration of Conformity is available
at:
www.datalogic.com
. Select the Support & Service
>Downloads > Product Certifications
link where you can search for your specific product
certification.
BATTERY SAFETY GUIDELINES
WARNING:
Installing, charging and/
or any other action should be done by
authorized personnel and following
this manual.
The battery pack may get hot, explode,
ignite, and/or cause serious injury if
exposed to abusive conditions.
If the battery pack is replaced with
an improper type, there is risk of
explosion.
Do not place the battery pack in or near
a fire or heat; do not place the battery
pack in direct sunlight, or use or store
the battery pack inside unventilated
areas in hot weather; do not place
the battery pack in microwave ovens,
dryer, high pressure containers, on
induction cookware or similar device.
Doing so may cause the battery
pack to generate heat, explode or
ignite. Using the battery pack in this
manner may also result in a loss of
performance and a shortened life
expectancy.
Use only a Datalogic approved power
supply. The use of an alternative
power supply will void the product
warranty, may cause product damage
and may cause heat, explode or ignite.
Immediately discontinue use of the
battery pack if, while using, charging
or storing the battery pack, the
battery pack emits an unusual smell,
feels hot, changes colour or shape, or
appears abnormal in any other way.
Do not short-circuit the battery pack
contacts connecting the positive
terminal and negative terminal. This
might happen, for example, when
you carry a spare battery pack in your
pocket or purse; accidental short–
circuiting can occur when a metallic
object such as a coin, clip, or pen
causes direct connection of the
contacts of the battery pack (these
look like metal strips on the battery
pack). Short–circuiting the terminals
may damage the battery pack or the
connecting object.
WARNING:
Do not apply voltages to the
battery pack contacts.
Do not pierce the battery pack with
nails, strike it with a hammer, step
on it or otherwise subject it to strong
impacts or shocks.
Do not disassemble or modify (i.e.
bend, crush or deform) the battery
pack. The battery pack contains safety
and protection devices, which, if
damaged, may cause the battery pack
to generate heat, explode or ignite.
In case of leakage of liquid from the
battery, avoid contact with liquid the
skin or eyes. If the contact occurs,
immediately wash the affected area
with water and consult a doctor.
Do not solder directly onto the battery
pack.
Do not expose the battery pack to
liquids.
Avoid any knocks or excessive
vibrations. If the device or the battery
is dropped, especially on a hard
surface, you should take it to the
nearest Authorised Repair Centre for
inspection before continuing to use it.
Do not remove or damage the battery
pack’s label.
Do not use the battery pack if it is
damaged in any part.
Battery pack usage by children should
be supervised.
Collect and recycle waste batteries
separately from the device in comply
with European Directive 2013/56/
EU, 2011/65/EU, 2012/79/EU and
subsequent modifications, US and
China regulatory and others laws and
regulations about environment.
