Datalogic Magellan 9300i, Product Reference Manual

Page: 394 / 520

Enter/Exit Programming Mode 1D Symbology Programming
382 Magellan™ 9300i / 9400i Scanners
I 2 of 5 Length 2
If I 2 of 5 Length Control is set to Fixed-Length decoding, this feature specifies
I 2 of 5 second fixed length. If I 2 of 5 Length Control is set to Variable-Length
decoding, this feature specifies the maximum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the bar code,
Set I 2 of 5 Length 2 on page 382 below. You’ll need to
cover any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the Keypad on page 461 in Appendix C
that represent the desired label length. The selectable range for this
option is 00, or 02 to 50; even numbers only. Pad all single digit numbers
with a leading zero to yield a two-digit entry (02-50).
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
NOTE
When in Fixed Length mode, if Length 2 is set to the value
of 00 (zero), then only Length 1 will apply.
Set I 2 of 5 Length 2
Default setting for this feature = 32
0057(CR)
DEFAULT