Datalogic MAGELLAN 8300, Product Reference Manual

Page: 80 / 558

3-8
Magellan
®
8300/8400
Sleep Mode
After the scanner has been left idle for a preset period of time, the laser
and/or motor automatically turns off (goes to sleep). This state is called
Sleep Mode, and is indicated by a “slow” blink of the green light (blinking
at a 2-second rate). To wake up the unit, press anywhere on the weigh
platter (scanner/scale models only), press the Volume Selection switch or
wave your hand over the horizontal window. The unit will recognize any
of these signals as a wake-up call and instantly return to Normal Opera-
tion.
Additional Functions
Additional scanner and scale functions include programming, running
scanner or scale diagnostics, initiating a reset, zeroing the scale, and cali-
brating the scale.
Programming
When your scanner or scanner/scale is shipped from the factory it is con-
figured to work with the POS system interface at your store and read the
bar code symbologies you designated. If you need to change this configu-
ration information for any reason,
Chapter 6, Programming , contains
special bar code labels for changing the unit’s settings.
Diagnostic Mode
Refer to Chapter 2, Diagnostic Modes , for details about running scan-
ner and scale diagnostics. Turn to Chapter 4, Problem Isolation , for a
description of error codes resulting from diagnostics.