Datalogic Magellan 800i, Product Reference Manual

Page: 132 / 168

Enter/Exit Programming Mode 2D Symbologies
124 Magellan™ 800i Scanner
QR Code Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Alphanumeric Pad and scan the four digits (zero-padded) repre-
senting the length.
Scan the END bar code.
Micro QR Code
Disable/Enable Micro QR Code
When disabled, the scanner will not read Micro QR Code labels.
NOTE
For QR Code labels, only the data characters are included
in the length calculations.
Any value set higher than 2710 will be considered to be
2710.
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 2710
03DA(CR)
03DB(CR)
Disable Micro QR Code
DEFAULT
Enable Micro QR Code
042800(CR)
042801(CR)
NOTE
Micro QR Code follows all of the QR Code configuration
settings for Length Control.