Datalogic Magellan 3450VSi, Product Reference Manual

Page: 40 / 352

Enter/Exit Programming Mode Good Read Beep Length
30 Magellan™ 3450VSi
Good Read Beep Length
Specifies the duration of a good read beep.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code,
Set Good Read Beep Length on page 30 . You’ll need to
cover any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the Alpha-Numeric Keypad in Appendix C
that represent the desired good read beep length setting. The selectable
range is 1-255, which is the timeout in 10-millisecond increments. Times
have a tolerance of +/-25%. Pad all single and double digit numbers with
leading zeroes to yield a three-digit entry (001-255).
Examples:
001 = 10ms
005 = 50ms
040 = 400ms
4. The scanner will automatically exit Programming Mode when the appro-
priate amount of digits have been scanned
0016(CR)
Set Good Read Beep Length
DEFAULT
Default setting for this feature is:
008 - 80ms
.