background image

Datalogic S.r.l.

Via S. Vitalino, 13 

40012 Calderara di Reno (BO)

Italy

Tel. +39 051 3147011

Fax +39 051 3147205

© 2022 Datalogic S.p.A. and /or its affiliates

All rights reserved. Without limiting the rights under copyright, no part of this documentation may be repro

-

duced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any

purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates.
Owners  of  Datalogic  products  are  hereby  granted  a  non-exclusive,  revocable  license  to  reproduce  and

transmit  this  documentation  for  the  purchaser's  own  internal  business  purposes.  Purchaser  shall  not

remove or alter any proprietary notices, including copyright notices, contained in this documentation and

shall ensure that all notices appear on any reproductions of the documentation.
Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com).

If you visit our website and would like to make comments or suggestions about this or other Datalogic pub

-

lications, please let us know via the "Contact" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is complete and accu

-

rate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein,

nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the

right to change any specification at any time without prior notice.

Trademarks

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including

the U.S.A. and the E.U.
Magellan is a trademark of Datalogic S.p.A. or of Datalogic and/or its affiliates, registered in many coun

-

tries, including the U.S. and the E.U. All other trademarks and brands are property of their respective own

-

ers.

Patents

See 

www.patents.datalogic.com

 for patent list.

ORIGINAL INSTRUCTIONS

See the Regulatory Addendum included with your product

for additional regulatory, safety and legal information.

Summary of Contents for MAGELLAN 3410VSi





















Reviews: