Quick Reference Guide
13
Programming
Upon completing the physical connection between the reader and
its host, proceed directly to the Programming Bar Codes table
below to locate the interface type the reader is connected to (for
example: RS-232, Keyboard Wedge, USB, etc.).
Use the Bar Code Mask on the preceding page to isolate the bar
code you intend to scan. Scan a Start/End bar code once to enter
Programming Mode. After selecting (scanning) the interface, scan
the ENTER/EXIT barcode a second time, which will then accept
your changes, exit Programming Mode and return the reader to
normal operation.
You can select other options and customize your reader through
use of the instructions and programming barcodes available in the
PRG or use the On Screen Programming (OSP) utility available
from the website listed on the back cover of this manual.
START / END
PROGRAMMING BAR CODES
RS-232 Standard
RS-232 Wincor-Nixdorf
