manualshive.com logo in svg

Datalogic Magellan 2200VS, Product Reference Manual

Share
Download
Datalogic Magellan 2200VS Product Reference Manual Download Page 231

RSS Expanded Enable

Product Reference Guide

5-183

RSS Expanded Enable

Enables/disables the ability of the scanner to decode RSS-Expanded labels.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You’ll need to cover 

any unused bar codes on this and the facing page to ensure that the 
scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH 

bar code.

RSS-EXPANDED = DISABLE

RSS-EXPANDED = ENABLE

NOTE

This value-added feature is a factory-programmed option. Contact 
your dealer for information about upgrading your system to include 
this advanced capability.

Summary of Contents for Magellan 2200VS





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands