Datalogic Magellan 2200VS, Product Reference Manual

Page: 171 / 388

Symbology Programming
Product Reference Guide
5-123
Symbology Programming
NOTE
UPC-A Enable
Enables/disables the ability of the scanner to decode UPC-A labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
UPC-A = DISABLE
UPC-A = ENABLE
If the scanner’s interface type must be changed, always be sure
that interface configuration is the FIRST item scanned during a
programming session. (Changing an interface type resets ALL
other configuration items — including symbology programming
— to the factory default for that interface type.)