manualshive.com logo in svg

Datalogic Magellan 2200VS, Reference Manual

Share
Download
Datalogic Magellan 2200VS Reference Manual Download Page 78

68

Magellan

®

 2200VS/2200VS and 2300HS/2300HS

Productivity Index Reporting (PIR)/Cashier Training (CT)

When PIR/CT is enabled, label quality data is appended to decoded data 
before being presented to the POS. The PIR feature allows the scanner to 
provide information to an external computer indicating how easy the label 
was to read. CT allows the scanner to provide feedback to the cashier on 
how to scan in a more ergonomic fashion.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You’ll need to cover 

any unused bar codes on this and the facing page to ensure that the 
scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH 

bar code.

PIR/CT = DISABLE

PIR/CT = ENABLE

NOTE

This value-added feature is a factory-programmed option. Contact 
your dealer for information about upgrading your system to include 
this advanced capability.

Summary of Contents for Magellan 2200VS

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands