manualshive.com logo in svg

Datalogic Magellan 2200VS, Reference Manual

Share
Download
Datalogic Magellan 2200VS Reference Manual Download Page 47

Flowcharts

Product Reference Guide

37

Figure 4-4. Problem Isolation: No Transmit to POS

This concludes the Problem Isolation Chapter.

DONE

DONE

NO TRANSMIT TO POS

START

Verify programmable 
parameters using the 
information and programming 
bar codes provided in Section 
5. Check interface and I/F 
options, inactive symbologies 
and other configurable 
features.

Troubleshoot 
the host or call 
Tech Support.

YES

NO

Does the

scanner read

satisfactorily

?

Check the interface (I/F) 
cable connections. If 
possible, retest the 
system using a known-
good I/F cable.

YES

NO

Does the

scanner pass

the data to

the POS

?

Summary of Contents for Magellan 2200VS

















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands