Datalogic lynx bt, Reference Manual

Page: 34 / 200

LYNX™ BT
3
3.2 SETTING UP LYNX™ BT WITH OM-1000 BT
To begin using your Lynx™ BT reader you must charge the Lynx™ BT battery
using OM-1000™ BT as described in par. 1.2. When the battery is completely
discharged, a full charge takes up to 4 hours with Li-Ion batteries.
The Lynx™ BT, paired with an OM-1000 BT cradle, builds a Cordless Reading
System for the collection, decoding and transmission of barcoded data.
Follow the given procedure to make Lynx™ BT communicating with OM-1000 BT.
1.
Apply power to the OM-1000 BT.
Read the Bind code to pair the Lynx™ BT to the OM-1000 BT cradle.
The reader is dedicated to the cradle. Any previously bound reader will be
excluded.
Bind
2.
AMHOHMFOFNGNENEIEPANHOGOCK
AHPHIJAMDKEOFMHMLJAKFEDGJK
AKCBPJCJGIIJCMCFHKKMEFDFPK
AEFBJLBGMHPLNMDKEBJBKCFFGK
AAPHBAJJCGEBADDAMPPMNPNBDK
AEKFAOMIPLKAKPFHGDMOEGDLIK
DDDLLLLDLDDLLLLDLLLDDLDLLL
The green LED on the Lynx™ BT will blink; the reader is ready to be inserted
into the cradle.
Place the Lynx™ BT series reader into the OM-1000 BT cradle, a series of
beeps will be emitted. After a short pause, the reader will then emit four
ascending tones signaling the correct radio connection. 3.
5. Proceed with the system connection and configuration according to your
application:
−
RS232 Interface (par. 3.2.1)
−
Wedge Interface (par. 3.2.2)
−
USB Interface (par. 3.2.3)
Green LED
14