manualshive.com logo in svg

Datalogic Joya, User Manual

Share
Download
Datalogic Joya User Manual Download Page 33

Use and Functioning

User’s Manual

27

If the scan has been successful:

•

If enabled, the good read beep plays.

•

If enabled, the GreenSpot projects a green spot onto the bar
code image.

•

If enabled, a pop-up window will report the data and the
symbology of the scanned bar code (See 

 “Data Capture

Configuration” on page -32

).

The field of view changes its size as you move the reader closer or
farther away from the bar code. The aiming pattern is smaller when
the imager is closer to the bar code and larger when it is farther
from the bar codebar code.

Scan symbols with smaller bars or elements (mil size) closer to the
unit and those with larger bars or elements (mil size) farther from
the unit. Hold the JOYA TOUCH between two and nine inches
(depending on symbol density) from the symbol, centering the
aiming pattern cross hairs on the symbol. 

Summary of Contents for Joya























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands