Datalogic Gryphon Series, Product Reference Manual

Page: 63 / 333

Enter/Exit Programming Mode Keyboard Settings
60 Gryphon™ I GD44XX / GBT4400/GM440X
Send Control Characters
This feature specifies how the reader transmits ASCII control characters to the host. Reference Appendix E,
Scancode Tables for more information about control characters.
Options are as follows:
Control Character 00 : Characters from 00 to 0x1F are sent as control character Ctrl+Keys, special keys are located
from 0x80 to 0xA1.
Control Character 01 : Characters from 00 to 0x1F are sent as control character Ctrl+Shift, special keys are located
from 0x80 to 0xA1.
Control Character 02 : Special keys are located from 00 to 0x1F and characters from 0x80 to 0xFE are intended as
an extended ASCII table (see "Microsoft Windows Codepage 1252" on page 327).
Wedge Send Control Characters = 00
Wedge Send Control Characters = 01
Wedge Send Control Characters = 02
DEFAULT
$CKBSC00(CR)
$CKBSC01(CR)
$CKBSC02(CR)