Enter/Exit Programming Mode
Label ID
80
Gryphon™ I GD44XX
/
GBT4400/GM440X
Label ID
A Label ID is a customizable code of up to three ASCII characters (convert to Hex using the
ASCII Chart on the inside back cover of this manual), used to identify a bar code symbology
type. It can be appended previous to or following the transmitted bar code data depending upon
how this option is enabled. This feature provides options for configuring custom Label IDs or
individually per symbology (see "Individually Set Label ID" on page 81). If you wish to
program the reader to always include an industry standard label identifier for ALL symbology
types, see the previous feature "Global AIM ID" on page 77.
See
Label ID, starting on page 269
of “References” for more information on setting this feature.
Label ID: Pre-Loaded Sets
The reader supports two pre-loaded sets of Label IDs. See
Label ID: Pre-loaded Sets, starting on
for details on the USA set and EU set.
CAUTION
When changing from one Label ID set to another, all other reader
configuration settings, including the host interface type, will be
erased and set to the standard factory defaults. Any custom config-
uration or custom defaults will be lost.
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
$AE(CR)
$Ae(CR)
DEFAULT
Summary of Contents for Gryphon I GBT4400
Page 42: ...Enter Exit Programming Mode Global Interface Features 40 Gryphon I GD44XX GBT4400 GM440X NOTES...
Page 56: ...Enter Exit Programming Mode RS 232 USB Com Interfaces 54 Gryphon I GD44XX GBT4400 GM440X NOTES...
Page 234: ...232 Gryphon I GD44XX GBT4400 GM440X NOTES...
Page 320: ...318 Gryphon I GD44XX GBT4400 GM440X A B C D E F...
