Datalogic Gryphon I GBT4400, Product Reference Manual

Page: 55 / 332

RS-232/USB-Com Interfaces Enter/Exit Programming Mode
Product Reference Guide 53
Disable Character
Specifies the value of the RS-232 host command used to disable the reader.
ASCII characters or any hex value from 0 to 0xFF can be selected.
See page 260 for more information on setting this feature.
Enable Character
Specifies the value of the RS-232 host command used to enable the reader.
ASCII characters or any hex value from 0 to 0xFF can be selected.
See page 261 in “References” for more information on setting this feature.
Setting to previously defined characters such as XON, XOFF, or host commands conflicts with
normal operation of these characters. 8-bit data is not recognized when the option
Data Bits
has been set as 7 Data Bits.
Select Disable Character Setting
Setting to previously defined characters such as XON, XOFF, or host commands conflicts with
normal operation of these characters. 8-bit data is not recognized when the option
Data Bits
has been set as 7 Data Bits.
Select Enable Character Setting
$CR2DC
DEFAULT
0x44 = Disable Character is ‘D’
$CR2EC
DEFAULT
0x45 = Enable Character is ‘E’