DEFAULT VALUES
USB-KBD DEFAULT SETTINGS
USA keyboard, FIFO enabled, inter-character and inter-code delays disabled,
USB keyboard speed normal.
DATA FORMAT
: code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = ENTER, character replacement disabled.
RS232 Standard DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx
timeout 5 sec., ack/nack disabled, FIFO enabled, serial trigger lock disabled.
DATA FORMAT
: code identifier disabled, no field adjustment, code length not
transmitted,
no header
,
terminator = CR-LF
, character replacement disabled.
WEDGE DEFAULT SETTINGS
USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock
unchanged, inter-character and inter-code delays disabled.
DATA FORMAT
: code identifier disabled, no field adjustment, code length not
transmitted,
no header
,
terminator = ENTER
, character replacement disable.
PEN DEFAULT SETTINGS
interpret mode, conversion to code 39 disabled, output level normal, idle level
normal, minimum output pulse 600
μ
s, overflow medium, inter-block delay disabled.
CODE SELECTION
Enabled codes
•
EAN 8/EAN 13 / UPC A/UPC E without ADD ON
check digit transmitted, no conversions
•
Interleaved 2/5
check digit control and transmission, variable length code; 4-99 characters
•
Standard Code 39
no check digit control, variable length code; 1-99 characters
•
Code 128
variable length code; 1-99 characters
Disabled codes
EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI,
Plessey, Telepen, Delta IBM, Code 11, Code 16K, Code 49, RSS Codes
TECHNICAL FEATURES
Gryphon
™
Dx30
Electrical Features
Power Supply
5 Vdc
±
5%
Consumption:
Gryphon D130
Gryphon D230
Maximum
Operating
Sleep mode/USB Suspend
270 mA@ 5 Vdc
165 mA@ 5 Vdc
<500 µA@ 5 Vdc
270 mA@ 5 Vdc
210 mA@ 5 Vdc
4 mA@ 5 Vdc
Max. Scan Rate
270 scans/sec
Reading Indicators
LED, Good Read Spot, Beeper
Optical Features
Sensor
CCD solid state (3648 pixels)
Illuminator LED
array
Wavelength
630 ~ 670 nm
Max. LED Output Power
0.33 mW
LED Safety Class
Class 1 EN 60825-1
Gryphon D130-Std
2 ~ 37 cm (20 mils)
Gryphon D130-LR
1 ~ 55 cm (20 mils)
2 ~ 25 cm (20 mils)
Reading
Field
Gryphon D230
3 ~ 14 cm (15 mils) for PDF417 code
Max. Resolution
Gryphon Dx30-Std
Gryphon D130-LR
0.076 mm (3 mils)
0.11 mm (4.3 mils)
PCS (Datalogic Test Chart)
min. 15%
Environmental Features
Working Temperature
0
°
C to + 55
°
C / 32° to +131 °F
Storage Temperature
-20
°
C to + 70
°
C / -4° to +158 °F
Humidity 90%
non
condensing
Drop Resistance
IEC 68-2-32 Test ED
1.8 m (5 ft 11 in)
Protection Class
IP30
Mechanical Features
Weight (without cable)
about 210 g (7.4 oz)
Cable Length
2 m (6 ft 6 in)
RESTORE DEFAULT
RESTORE DEFAULT
Ì$+$*oÎ
To change the defaults refer to the “Gryphon™ Dx30/Mx30 Reference Manual”,
part number
90ACC1930
, or to the Datalogic Aladdin™ Configuration program,
both downloadable from the website.
INTERFACE SELECTION
Select one of the interface codes according to your application.
USB INTERFACE SELECTION
USB-KBD
Ì$+UA03$-:Î
USB-KBD - ALT-mode
Ì$+UA04$-@Î
USB-COM *
Ì$+UA02$-4Î
USB-IBM-Hand
Held
Ì$+UA01$-.Î
* When configuring USB-COM, the relevant files and drivers must be installed
from the USB Device Installation software, which can be downloaded from the
web site http://www.scanning.datalogic.com.
PEN EMULATION INTERFACE SELECTION
PEN
Ì$+CP6$-BÎ
RS232 INTERFACE SELECTION
RS232 Standard
Ì$+CP0$-$Î
Nixdorf Mode A
Ì$+CM2EC0$->Î
Fujitsu
Ì$+CM1$-ÈÎ
ICL
Mode
Ì$+CM0$-ÃÎ
WEDGE INTERFACE SELECTION
Wedge IBM AT or PS/2 PCs
Ì$+CP500$-aÎ
PC
Notebook
Ì$+CP505$-ÈÎ
PC Notebook - ALT mode
Ì$+CP508$-2Î
IBM AT - ALT mode
Ì$+CP507$-+Î
Many other interfaces are supported and can be selected from the “Gryphon™
Dx30/Mx30 Reference Manual” available online at www.scanning.datalogic.com.
Other supported interfaces:
USB
: USB-IBM-Table Top; USB-KBD-APPLE
WEDGE
: IBM XT; IBM SURE1; IBM Terminal 3153; IBM Terminals 31xx, 32xx,
34xx, 37xx; Wyse Terminals ANSI – PC –ASCII – VT220 style Keyboards; Digital
Terminal VT2xx/VT3xx/VT4xx; APPLE ADB Bus
KEYBOARD NATIONALITY
USB-KBD and Wedge users should select one of the following wedge keyboard
nationality codes according to your keyboard.
Belge
Ì$+FJ7$-8Î
Deutsch
Ì$+FJ3$-$Î
English
Ì$+FJ4$-)Î
Español
Ì$+FJ6$-3Î
Français
Ì$+FJ2$-ÊÎ
Italiano
Ì$+FJ1$-ÅÎ
Japanese
Ì$+FJ8$-=Î
Svenskt
Ì$+FJ5$-.Î
USA (Default)
Ì$+FJ0$-|Î
DATA FORMAT TERMINATORS
For your convenience, some common Terminators are given below. For other
Header/Terminator selections, Data Format and Advanced Data Format
parameters, see the “Gryphon™ Dx30/Mx30 Reference Manual”.
CR-LF
Ì$+EA120D0A$-ÃÎ
Enter
Ì$+EA1183$-0Î
Tab
Ì$+EA1184$-8Î
None
Ì$+EA10$-dÎ
USING GRYPHON
™
DX30 READERS
Gryphon
™
guns automatically scan barcodes
at a distance
. Simply aim and pull
the trigger. Code scanning is performed along the center of the light bar emitted
from the reading window. This bar must cover the entire code.
Successful scanning is obtained by tilting the scanner with respect to the barcode
to avoid direct reflections, which impair the reading performance, see the figure
above.
Successful reading is signaled by an audible tone plus a good-read green spot.
OPERATING TEST
Read the TEST codes below.
EAN-8
1 2 3 4 5 6 7 0
EAN-13
1 2 3 4 5 6 7 0 0 0 9 9 2
Code 39 (Normal)
1
7
1
6
2
Code 128
t
e
s
t
Interleaved 2 of 5
0 1 2 3 4 5 6 7 8 4
