GRYPHON™ D432/D432E
from the O.S. (if requested). When configuring the USB-COM interface, the
relevant files and drivers must be installed from the USB Device Installation
software, which can be downloaded from the web site http://www.datalogic.com.
The reader is ready.
First Start-Up
Does a dialog
box appear
warning that Bus
power is not
sufficient?
Green LED off
Select desired USB
interface code
(USB-KBD is default)
NO
YES
Read test codes.
Reader is READY
Load drivers
(if requested)
Load drivers
(if requested)
Green LED blinks
Green LED off - BEEP OK
BEEP OK
Connect
Gryphon™ D432/D432E to Host
Disconnect reader
at Host
Connect external
power supply to
cable and power up
Reconnect reader
cable to Host and
close dialog box
Successive start-ups will automatically recognize the previously loaded drivers.
If external power is used, verify that external power is already supplied.
Successive Start-Ups
NO
YES
Read test codes.
Reader is READY
Green LED blinks
Green LED off - BEEP OK
BEEP OK
Connect Gryphon™ D432/D432E
to Host
Disconnect reader at Host
Connect external power supply to
cable and power up
Reconnect reader cable to
Host and close dialog box
Does a dialog box
appear warning
that Bus power is
not sufficient?
7
Summary of Contents for Gryphon D432
Page 1: ...Gryphon D432 D432E Quick Reference...
Page 2: ......
