Datalogic Gryphon BT4102, Product Reference Manual

Page: 312 / 354

References
310 Gryphon™ I GD4132/GM4102/GBT4102
RF Features
Configuration Update
Automatic Configuration Update
When this feature is enabled, the base station and reader will keep their config-
urations synchronized. If a reader's configuration is altered by reading pro-
gramming labels, this change is automatically transferred and updated in a
linked base station. Likewise, if the base station's configuration is changed
using Aladdin or by host commands, then the reader's configuration will auto-
matically be updated if this feature is enabled.
RF Address Stamping
Source Radio Address Delimiter Character
This option specifies the delimiter character to be placed between the label
data and radio address when address stamping is enabled.
This feature only applies if
"Source Radio Address Transmis-
sion"
on page 273 is enabled.
Follow these instructions to select the delimiter character:
1. Determine the desired character, then find its hexadecimal equivalent on
the ASCII Chart on the inside back cover. A setting of 00 specifies no
delimiter character.
2. Go to page 274 and scan the ENTER/EXIT PROGRAMMING MODE barcode
to enter Programming Mode.
3. Scan the barcode: SET SOURCE RADIO ADDRESS DELIMITER CHARACTER.
4. Scan the appropriate two digits from the keypad in
Appendix D, Keypad ,
that represent the hexidecimal characters which were determined in the
steps above. You will hear a two-beep indication after the last character.
If you make a mistake before the last character, scan the CANCEL bar-
code to abort and not save the entry string. You can then start again
at the beginning.
5. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming
Mode.
This completes the procedure. See Table 45 for some examples of how to set
this feature.