manualshive.com logo in svg

Datalogic GRYPHON BT, Reference Manual

Share
Download
Datalogic GRYPHON BT Reference Manual Download Page 106

GRYPHON™ BT 

96 

 

5 

5.5.5 

User Friendly Name 

 
This parameter provides a way to identify the Gryphon™ BT reader in a human 
readable (user-friendly), format. This name is returned with the reader configuration 
parameters (see par. 5.6). The name is made up of a fixed 20-character field. If you 
choose to use a name that is less than 20 characters, you must fill in the blanks with 
a valid character (i.e. space character). Valid characters are in the range 00 - 7E and 
must be entered in hex format. 
 
 

5.5.6 

Beeper Control for Radio Response 

 
The data entry good read tone normally results in two beeps; the first indicates that 
the reader has decoded the code, the second indicates whether the remote 
Bluetooth

®

 device has received the data. 

 
This can be changed according to the following selections: 

♦ 

Good Decode and Good Reception: both good decode and good reception are 
signaled (two beeps). 

♦ 

Only Good Decode: only the first beep indicating a good read is signaled. 

♦ 

Only Good Reception: only the second beep indicating a good reception is 
signaled. 

♦ 

Off: Neither good read nor good reception beeps are signaled. 

 

For all configurations, any transmission errors will always be signaled. 

 
 

5.5.7 

Auto-Connection (Master only) 

 
Upon power-up, the Gryphon ™ BT reader makes attempts to connect with the 
remote Bluethooth

®

 device (Slave). If the connection is not successful, the reader 

remains on, but not connected. 
 
In this case the connection can be re-requested by double clicking the reader trigger 
or by reading the "Request Radio Connection" command in par. 5.7. 
 
 

5.5.8 

Auto-Reconnection (Master only) 

 
If a radio connection is interrupted, the Gryphon ™ BT reader makes attempts to 
reconnect with the remote Bluethooth

®

 device (Slave). If the connection is not 

successful, the reader remains on, but not connected. 
 
In this case the connection can be re-requested by double clicking the reader trigger 
or by reading the "Request Radio Connection" command in par. 5.7. 

Summary of Contents for GRYPHON BT





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands