Datalogic GBT4400BK, Product Reference Manual

Page: 260 / 350

Enter/Exit Programming Mode
250 Gryphon™ I GD44XX/GBT4400/GM440X
Source Radio Address Delimiter Character
This option specifies the delimiter character to be placed between the label
data and radio address when address stamping is enabled.
Set Source Radio Address Delimiter Character
To configure this feature, scan the ENTER/EXIT PROGRAM-
MING MODE bar code above, then the bar code at left fol-
lowed by the digits from the Alphanumeric characters in
Appendix D, Keypad
representing your desired char-
acter(s). End by scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
This feature only applies if
"Source Radio Address Transmis-
sion"
on page 249 is enabled.
$CBTAD
~
DEFAULT
00 = No Delimiter Character