Elf™/Falcon™ X3 Single Slot Dock
NOTE
Read this manual carefully before performing any type of
connection from the terminal to a host PC using the
Single Slot Dock.
The user is responsible for any damages caused by
incorrect use of the equipment or by inobservance of the
indication supplied in this manual.
NOTE
Do not attempt to disassemble the Single Slot Dock, as it
does not contain parts that can be repaired by the user.
Any tampering will invalidate the warranty.
The Single Slot Dock paired with an Elf PDA or a Falcon X3 mobile
computer builds a reading system for the collection, decoding and
transmission of barcoded data.
The Single Slot Dock is both a USB and a serial communication adapter
between the terminal and the host computer.
The Single Slot Dock also functions as a battery charger, both for the
terminal and the spare battery pack. The spare battery can be charged by
inserting it into the slot at the back of the cradle.
Power supply is required for the Elf or the Falcon X3 to be connected to
the cradle and for battery recharging operations.
Figure 1 –Single Slot Dock General View
Key:
A)
Contacts for Elf/Falcon X3
B)
Power on LED
C)
Battery charge status LED
D) RS232
connector
E) USB
connector
F)
Power supply connector
G)
Spare battery slot
822000902 (Rev. B)
MOBILE COMPUTER INSERTION/ REMOVAL
For correct insertion into the cradle, insert the mobile computer from the
top of the cradle and push it down until the clip of the cradle clicks.
Figure 2 - Mobile Computer Insertion
To remove the mobile computer from the cradle, simply pull it upwards
while holding the cradle firmly down.
Power Supply
Each dock requires a power supply to be connected to mobile computers.
We recommend the power supply already included in the box.
-
+
Figure 3 - Power Supply Polarity
LED INDICATORS
Power LED Status Indicator
Color Status
Green Cradle
powered
Battery Charging LED Status Indicators
Color Status
Off Battery
absent
Red
Battery charge in progress
Green Charge
completed
Red Blinking
Error
USING THE SPARE BATTERY CHARGER
Correctly insert the battery pack into the slot: simply press it into the slot
until the battery latch is automatically closed; charging starts
automatically.
Figure 4
To remove the battery, release the latch on the battery pack.
Figure 5
FASTENING THE DOCK TO A SURFACE
To securely fasten the Single Slot Dock to tables, desks and other
surfaces, and to prevent the dock from moving when you remove the
device, use the four velcro dual lock feet provided with the matching dual-
lock adhesive pads.
Figure 6
Remove the protective feet from the dock before attaching the velcro dual
lock feet.
A
C
B
F
E
D
G
