INSTALLATION – DX8200 SERIAL INTERFACE
9
2
2.2.3 Conversion to External 24 Vdc Supply (Optional)
You can convert AC models to be supplied by an external 24 Vdc source. Proceed as
follows:
1. Open the panel as described in par. 2.2.
2. Disconnect the internal 24 Vdc power connector, referring to Figure 5.
Figure 5 - Disconnecting the 24 Vdc internal power supply connector
3. Connect the external 24 Vdc jumper onto the power connector, referring to Figure 6.
Figure 6 - Connecting the power supply jumper for external 24 Vdc operation
You must supply 24 Vdc power through the 17-pin
connector
A
or
B
(Figure B, 6, 10).