Datalogic DX6400 Quick Reference Manual Download Page 16

DX6400 QUICK GUIDE 

16 

 

 

POWER SUPPLY 

 

This product is intended to be installed by Qualified Personnel only.

 

 

All DX6400 Models:

 

This device is intended to be supplied by a UL Listed Power Unit marked “Class 2” or LPS power source 
which supplies power directly to the scanner via the 25/26-pin connector. 

 
 
 

CE COMPLIANCE 

 

Warning: 

This is a Class A product. In a domestic environment this product may cause radio interference in which case the 
user may be required to take adequate measures. 
 
 
 

FCC COMPLIANCE 

 
Modifications or changes to this equipment without the expressed written approval of Datalogic could void the 
authority to use the equipment. 
 
This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference which may cause undesired operation. 
 
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate 
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause 
harmful interference in which case the user will be required to correct the interference at his own expense. 
 
 
 
 
 

PATENTS 

 
 
This product is covered by one or more of the following patents. 
 
U.S. patents: Re. 36,251; 5,992,740; 6,049,406;  6,347,740 B1;  6,394,352 B1;  6,443,360 B1;  6,629,639 B2; 
6,742,710 B2; 7,161,685 B1; 7,195,162 B2. 

European patents: 652,530 B1; 643,362 B2; 786,734 B1;  789,315 B1;  851,376 B1;  959,426 B9;  1,300,798 B1; 
1,217,571 B1; 1,363,228 B1; 1.607,901 B1. 

Japanese patents: 3,793,585 B2; 4,033,958 B2; 4,129,302 B2; 4,376,353 B2; 4,451,592 B2. 
 
 
 
 

Summary of Contents for DX6400

















Reviews: