Datalogic DS2200 SH2348, Installation Manua, Page: 8 / 28

vii
The warning label indicating exposure to laser light and the device
classification is applied onto the body of the scanner (figure A, ):
CAUTION - LASER LIGHT WHEN OPEN
AVOID EXPOSURE TO BEAM
This product conforms to the applicable
requirements of 21CFR1040 at the date of
manufacture.
DATALOGIC S.p.A. Via Candini, 2
40012 Calderara di Reno - Bologna - Italy
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX. OUTPUT RADIATION 1 mW
EMITTED WAVELENGTH 630~680 nm
TO IEC 825-1 (1993)
Warning and device class label
For installation, use and maintenance it is not necessary to open the scanner.
The laser diode used in this device is classified as a Class 3B laser product
according to IEC 825-1 regulations and as a Class IIIb laser product according
to CDRH regulations. As it is not possible to apply a classification label on the
laser diode used in this device, the following label is reproduced here:
LASER LIGHT
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
MAXIMUM OUTPUT RADIATION 7 mW
EMITTED WAVE LENGTH 630
∼
680 nm
TO IEC 825 - 1 (1993)
Laser diode class label
Any violation of the optic parts in particular can cause radiation up to the
maximum level of the laser diode (7mW at 630
∼
680 nm).
7