Datalogic DS2200 SH2348, Installation Manua, Page: 14 / 28

DATALOGIC DS2200
Installation - 5
2.3 ELECTRICAL CONNECTIONS
The DS2200 cable is equipped with a 25-pin female D-sub connector for
connection with the power supply and input/output signals:
Figure 2.3 – 25-pin female D-sub connector
25-pin D-sub connector pinout
Pin Name Function
9,13 VS Power supply input v
25 GND Power supply input voltage -
1 CHASSIS Chassis Ground
19 EXT TRIG- External Trigger -
22, 10,12 I/O REF I/O reference
8 OUT1 + Output 1 +
11 OUT2 + Output 2 +
2 TXAUX TX RS232 Aux. Interface
3 RXAUX RX RS232 Aux. Interface
4 RTX485- RTX- RS485 Main Interface
5 RTX+ RS485 Main Interface
7 SGND Signal Ground
16 NGND Internal Use - for Service only
17 FPE Internal Use - for Service only
6, 14, 15, 18, 20, 21, 23, 24 NC No Connect
2.3.1 Power supply
The following pins of the DS2200 connector are used:
13/9
25
1
VS
GND
CHASSIS
USER INTERFACE
GND
V+ (5 Vdc)
DS2200
Figure 2.4 - Power supply connections
The power must be 5 Vdc only.