12
User’s / Programming Guide
1.
Scan the bar code beside Intercharacter Delay = XX and lis-
ten for one short-high beep.
2.
After the beep, scan the bar code beside 0 on the Digit Selec-
tion page and listen for one short-high beep.
3.
Still at the Digit Selection page, scan the bar code for 5 (the
last argument in the command) and listen for two short
beeps.
Your PSC scanner does not have a distinct programming mode.
Instead, it automatically recognizes and reacts to the labels you scan.
If, for example, you scan INTERCHARACTER DELAY = XX and
then scan a normal data label, a normal tone is emitted in response to
the data label, and the programming command is ignored.
No special
exit code is required to resume normal operations.
Summary of Contents for DS1100 SH2347
