CODE SELECTION
51
Set Lengths for Codabar
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Lengths for Codabar can be
set for any length, one or two discrete lengths, or lengths within a specific range. To
set lengths via serial commands; see
Setting Code Lengths Via Serial Commands
in
Appendix B.
One Discrete Length
- Select this option to decode only those codes containing a
selected length. For example, select
Codabar One Discrete Length
, then scan
1
,
4
in Appendix C to decode only Codabar symbols containing 14
characters. To change the selection or cancel an incorrect entry, scan the
barcode in Appendix C.
ia'dGk
ia'dGk
ia'dGk
CODABAR - ONE DISCRETE LENGTH
Two Discrete Lengths
- This option sets the unit to decode only those codes
containing two selected lengths. For example, select
Codabar Two Discrete
Lengths
, then scan
0
,
2
,
1
,
4
in Appendix C to decode only
Codabar symbols containing 6 or 14 characters. To change the selection or cancel
an incorrect entry, scan the
barcode in Appendix C.
ia'dGk
ia'dGk
ia'dGk
CODABAR - TWO DISCRETE LENGTHS
Length Within Range
- Select this option to decode a code within a specified range.
For example, to decode Codabar symbols containing between 4 and 12 characters,
first scan
Codabar Length Within Range
, then scan 0,
4
,
1
and
2
(single digit
numbers must always be preceded by a leading zero)
in Appendix
C. To change the selection or cancel an incorrect entry, scan the
barcode in
Appendix C.
ia'dGk
ia'dGk
ia'dGk
CODABAR - LENGTH WITHIN RANGE
Summary of Contents for Dragon D151
Page 6: ...vi ...
