Datalogic Dragon D151 Reference Manual Download Page 39

Page: 39 / 107

CODE SELECTION

Decode UPC/EAN Supplementals

Supplementals are appended characters (2 or 5) according to specific code format
conventions (e.g., UPC A+2, UPC E+2, EAN 8+2). Several options are available:

•

If Decode UPC/EAN with Supplemental characters is selected, the reader

does not decode UPC/EAN symbols without supplemental characters.

•

If Ignore UPC/EAN with Supplemental characters is selected, and the

reader is presented with a UPC/EAN symbol with a supplemental, the
reader decodes the UPC/EAN and ignores the supplemental characters.

•

If Autodiscriminate UPC/EAN Supplementals is selected, scan the

DECODE

UPC/EAN SUPPLEMENTAL REDUNDANCY

barcode then select a value from

the Numeric Barcodes in Appendix C. A value of 5 or more is
recommended.

Note:

To minimize the risk of invalid data transmission, we recommend selecting

whether to read or ignore supplemental characters.

Select the desired option by scanning one of the following barcodes.

iade&k

DECODE UPC/EAN WITH SUPPLEMENTALS

iade&k

IGNORE UPC/EAN WITH SUPPLEMENTALS

iade&#k

AUTODISCRIMINATE UPC/EAN SUPPLEMENTALS

Summary of Contents for Dragon D151












































































































Search results

Summary of Contents for Dragon D151

Reviews:

Datalogic Dragon D151, Reference Manual, Page: 39 / 107

Search results

Summary of Contents for Dragon D151

Reviews: