background image

Quick Reference Guide

i

Table of Contents

END USER LICENSE AGREEMENT  .................................................................iii
Software Product Policy ..................................................................................v

Customers Under Software Support  .....................................................v

Using the BC9xx0 Base Station .....................................................................  1
Installation ....................................................................................................... 2
Mounting the BC9xx0 Cradle  ......................................................................... 2

Mounting Brackets  ................................................................................. 2

To change the Bracket:...................................................................  3

Permanent Mounting ............................................................................. 4
Mounting for Portable Use  .................................................................... 4

Mounting the Metal Plate..............................................................  4
Attaching the Metal Plate to Base................................................  5

System Connections  ....................................................................................... 6

BC9x80 models - Ethernet Connection  ................................................ 6

Ferrite Clamp Filter.........................................................................  6

Non-Ethernet Connection ...................................................................... 7

Connecting and Disconnecting the Multi-Interface Cable .........  7

Configuration ................................................................................................... 8

BC9x80 Ethernet Models  ....................................................................... 8
Non-Ethernet Models  ............................................................................ 8

Datalogic Aladdin™..........................................................................  8
Serial Configuration ........................................................................  8
Configuration Bar Codes ................................................................  9

Selecting the Interface Type  .......................................................................... 9

Configuring the Interface  ....................................................................... 9

Ethernet Interface (BC9x80 Models only).....................................  9
RS-232 ...........................................................................................  10
USB .................................................................................................  11
Keyboard Interface .......................................................................  12
Scancode Tables............................................................................  13

Country Mode ........................................................................................ 14
Caps Lock State ..................................................................................... 18
Numlock ................................................................................................. 19
Resetting Standard Product Defaults  ................................................ 20
Compatibility with the PowerScan™ 8000 family  .............................. 20

Technical Features ........................................................................................ 21
Regulatory Information ................................................................................ 23

Compliance ............................................................................................ 23
Power Supply ......................................................................................... 23
FCC Compliance ..................................................................................... 23

Summary of Contents for BC9xx0-STAR









































Reviews: